[−][src]Struct gimli::read::LineSequence

pub struct LineSequence<R: Reader> {
    pub start: u64,
    pub end: u64,
    // some fields omitted
}

A sequence within a line number program. A sequence, as defined in section 6.2.5 of the standard, is a linear subset of a line number program within which addresses are monotonically increasing.

Fields

start: u64

The first address that is covered by this sequence within the line number program.

end: u64

The first address that is not covered by this sequence within the line number program.

Trait Implementations

`impl<R: Clone + Reader> Clone for LineSequence<R>`[src]

`fn clone(&self) -> LineSequence<R>`[src]

`fn clone_from(&mut self, source: &Self)`1.0.0[src]

`impl<R: Debug + Reader> Debug for LineSequence<R>`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result`[src]

Auto Trait Implementations

`impl<R> Send for LineSequence<R> where R: Send,`

`impl<R> Sync for LineSequence<R> where R: Sync,`

`impl<R> Unpin for LineSequence<R> where R: Unpin,`

Blanket Implementations

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> ToOwned for T where T: Clone,` [src]

`type Owned = T`

The resulting type after obtaining ownership.

`fn to_owned(&self) -> T`[src]

`fn clone_into(&self, target: &mut T)`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = >::Error`

The type returned in the event of a conversion error.

[−][src]Struct gimli::read::LineSequence

Fields

Trait Implementations

`impl<R: Clone + Reader> Clone for LineSequence<R>`[src]

`fn clone(&self) -> LineSequence<R>`[src]

`fn clone_from(&mut self, source: &Self)`1.0.0[src]

`impl<R: Debug + Reader> Debug for LineSequence<R>`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result`[src]

Auto Trait Implementations

`impl<R> Send for LineSequence<R> where R: Send,`

`impl<R> Sync for LineSequence<R> where R: Sync,`

`impl<R> Unpin for LineSequence<R> where R: Unpin,`

Blanket Implementations

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> ToOwned for T where T: Clone,` [src]

`type Owned = T`

`fn to_owned(&self) -> T`[src]

`fn clone_into(&self, target: &mut T)`[src]

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

[−][src]Struct gimli::read::LineSequence

Fields

Trait Implementations

impl<R: Clone + Reader> Clone for LineSequence<R>[src]

fn clone(&self) -> LineSequence<R>[src]

fn clone_from(&mut self, source: &Self)1.0.0[src]

impl<R: Debug + Reader> Debug for LineSequence<R>[src]

fn fmt(&self, f: &mut Formatter<'_>) -> Result[src]

Auto Trait Implementations

impl<R> Send for LineSequence<R> where R: Send,

impl<R> Sync for LineSequence<R> where R: Sync,

impl<R> Unpin for LineSequence<R> where R: Unpin,

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized, [src]

fn type_id(&self) -> TypeId[src]

impl<T> Borrow<T> for T where T: ?Sized, [src]

fn borrow(&self) -> &T[src]

impl<T> BorrowMut<T> for T where T: ?Sized, [src]

fn borrow_mut(&mut self) -> &mut T[src]

impl<T> From<T> for T[src]

fn from(t: T) -> T[src]

impl<T, U> Into<U> for T where U: From<T>, [src]

fn into(self) -> U[src]

impl<T> ToOwned for T where T: Clone, [src]

type Owned = T

fn to_owned(&self) -> T[src]

fn clone_into(&self, target: &mut T)[src]

impl<T, U> TryFrom<U> for T where U: Into<T>, [src]

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

impl<T, U> TryInto<U> for T where U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

`impl<R: Clone + Reader> Clone for LineSequence<R>`[src]

`fn clone(&self) -> LineSequence<R>`[src]

`fn clone_from(&mut self, source: &Self)`1.0.0[src]

`impl<R: Debug + Reader> Debug for LineSequence<R>`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result`[src]

`impl<R> Send for LineSequence<R> where R: Send,`

`impl<R> Sync for LineSequence<R> where R: Sync,`

`impl<R> Unpin for LineSequence<R> where R: Unpin,`

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> ToOwned for T where T: Clone,` [src]

`type Owned = T`

`fn to_owned(&self) -> T`[src]

`fn clone_into(&self, target: &mut T)`[src]

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]